A Few Factors that Affect the Bearing Performance of a Spindle

4 Factors that Affect the Bearing Performance of a Spindle
Author: melissa

In order to be assured of an optimum spindle performance, some points need to be considered including: the type of spindle bearing, its maximum speed capacity, the belt drive, and lubrication requirements.

Proprietors in metal industries only want one thing for their businesses: to maximize production for guaranteed revenue. To achieve that, they always make sure that in addition to having adept workers, their machinery functions optimally. One important element that requires utmost attention and is considered as the heart of their devices the spindle bearing. Failure to monitor the entire configuration of the equipment can bring about poor production, which can affect the company's performance. Some factors that may influence the operation of the spindle and must be given focus are:

Type of spindle bearing

The bearing system is considered the most important part of the spindle because it gives the cutter the edge to perform to its fullest. Although there are several types available, each has its own advantage. The most common is the angular contact ball bearing. Also known as the precision ball bearing because of its high speed feature, metal industries find this very practical in meeting various cutting spindle needs. Another type is the roller bearing, known as the cylindrical bearing. This one is stiffer than the angular type. The last type is the tapered roller bearing, which is similar to the roller, but operates at a slower speed.

Maximum speed capacity

Since a variety of spindle-bearing systems are available, you must consider that the speed capacities of each. Several factors the swiftness of the spindle and depend on the model used. The speed capacities of spindle bearing systems are important things one should pay attention to.

Belt drive

The belt tension is another issue to consider when assessing spindle performance. If the belt is too loose it will cause poor performance. A belt that is too tight will result in heat buildup.

Lubrication

To allow maximum speed, there should be enough lubrication on the spindle. Reduced friction between the contact surfaces can lower maintenance cost and prolong its lifespan. The most commonly used lubricant is grease because it is easy to apply, has a permanent benefit, and requires less maintenance. However, the amount of grease used should also be monitors since too much of it can cause excessive heat production. Although quantity is essential, one should never overlook the quality of grease. Do not attempt to use substandard products because these may result in unfavorable consequences.

The above mentioned considerations indicate one important message: proper maintenance and regular check up are essential to the longevity of your spindle performance. The lifespan of your device will depend on how you care for it.


------

To learn more about spindle bearing and spindle repair  services, check out Motor City Repair  for information.

Article Source: http://www.a1articles.com/article_1591601_31.html

About the Author:


spindle repair services,spindle